Low Profile Shoulder Float

07-low-profile


Techstar Low Profile Shoulder Float
 is uniquely molded with a mounting shoulder and holes to bolt thru to your frame. They are ideal for all applications including commercial docks and large residential docks.

Low Profile Shoulder Float

low-profile-newFeatures and Benefits

  • Low Profile Shoulder Float allows you to use any size framing lumber and bolt sideways thru a choice of 8 molded holes.
  • Now foam filled for added security.
  • 12” of flotation sits under your frame
  • Many dock builders find this float the easiest to build with.




Requirements:

A minimum of one LP-2448 is required for every 20 square feet of deck surface of the dock you are building. If your dock is going to be 30’x12’ or 360 square feet, you would need 18 floats minimum (360 divided by 20 = 18) to float your dock properly. 4 Floats should be set in the corners and the balance spread evenly throughout the surface area.

Model NumberOutside DimensionsFlotation (pounds)Average Wall ThicknessSq. Foot Deck CoverageShipping WeightPer Skid
LP-2448 24" x 48" x 16" 425 .250 20 48 10