Bumper Floats

TECHSTAR™ Bumper Floats are a unique combination of dock bumper and flotation. Designed to run the length of your dock on both sides, these floats will comfortably float a dock 8ft wide. For docks 10-12ft wide we recommend one row of centre floats, and for docks 14-16ft we recommend two rows of centre floats.

BF-12-30#1
BF-1-RAFT
BF-12-04-SHAWN
BF-12-30-CHAIRS
BF-12-BLACK-SUNNY
BF-12-BLACK
BF-12-SANDSTONE
BF12-04
BF12-30-MOUNTAIN
Model No.
Outside Dimensions (inches)
Flotation (lbs)
Average Wall Thickness
Center Float Model
Weight (lbs)
Per Skid
Available Colours
BF-1
24 x 48 x 16
415 lbs
.187
AP-8
43 lbs
12
Black (04), Sandstone (30)
BF-12
24 x 48 x 21
430 lbs
.187
AP-12
43 lbs
12
Black (04), Sandstone (30)
BF-3
24 x 48 x 25
700 lbs
.250
MF-2448
65 lbs
8
Black (04), Sandstone (30)

Why Choose TECHSTAR™ Bumper Floats 

  • Dock Bumpers are built in as part of the float.
  • Foam filled with closed cell EPS (expanded polystyrene) for added security.
  • Your wood frame, hardware and decking stay out of the water.
  • Polyethylene is environmentally friendly, as well as gasoline and wildlife resistant.
  • Construction is simple. Build a frame with corner brackets and attach floats through molded bolt holes.
  • Deck boards can sit flush with the top of the floats for a clean finish.
  • Standard colour is black but Bumper Floats are also available in our premium colour Sandstone at an extra cost.

TIP: Each of our Bumper Float models is 4ft long so aim to build the length of your dock in 4ft increments (8ft, 12ft, 16ft, 20ft etc.)

BF-1-04

BF-1-04-ENDBF-1-04-END
BF-1-04-SIDEBF-1-04-SIDE
BF-1-04-SIDE2BF-1-04-SIDE2
BF-1-04BF-1-04

BF-1-30

BF-1-30-ENDBF-1-30-END
BF-1-30-OUTSIDEBF-1-30-OUTSIDE
BF-1-30-SIDEBF-1-30-SIDE
BF-1-30 2BF-1-30 2

BF-12-04

BF-12-04-ENDBF-12-04-END
BF-12-04-SIDEBF-12-04-SIDE
BF-12-04-SIDE2BF-12-04-SIDE2
BF-12-04BF-12-04

BF-12-30

BF-12-30-ENDBF-12-30-END
BF-12-30BF-12-30
BF-12-30-OUTSIDEBF-12-30-OUTSIDE
BF-12-30-INSIDEBF-12-30-INSIDE